6th International Young Scientist Congress (IYSC-2021) and workshop on Intellectual Property Rights on 8th and 9th May 2021.  10th International Science Congress (ISC-2020) will be Postponed to 8th and 9th December 2021 Due to COVID-19.  International E-publication: Publish Projects, Dissertation, Theses, Books, Souvenir, Conference Proceeding with ISBN.  International E-Bulletin: Information/News regarding: Academics and Research

Tensile and Impact behaviour of Al-Sic-Zn-Cu Metal Matrix Composite

Author Affiliations

  • 1Department of Mechanical Engineering, National Institute of Technology, Warangal, Andhra Pradesh, INDIA
  • 2 SR Engineering College, Warangal, Andhra Pradesh, INDIA
  • 3 Department of Mechanical Engineering, National Institute of Technology, Warangal, Andhra Pradesh, INDIA

Res. J. Engineering Sci., Volume 3, Issue (2), Pages 17-22, February,26 (2014)

Abstract

Aluminium is one of the lightest available commercial metals with a density approximately one third that of steel or copper. Its high strength to weight ratio makes it particularly important to transportation industries allowing increased pay loads and fuel savings. The Aluminum-Silicon Carbide-Zinc and Copper alloys are the primary alloys used in airframe structural applications, automobile and recreational industries. In this paper, Al-SiC-Zn-Cu are varied by different proportions mainly Zn (2%, 4%, 6%, 8%) and Cu (2%, 4%, 6%, 8%), tensile test and impact tests are performed to evaluate the mechanical properties like tensile strength, % elongation, yield stress on computerized UTM and impact strength by using Izod and Charpy tests. The variation of mechanical properties with the increasing percentage composition of Zinc and Copper are evaluated. The results are quantified and analyzed by graphical analysis.

References

  1. Hatch J.E., Aluminum: Properties and physical metallurgy, ASM, Metals park, OH. (1993)
  2. Doel.T.J.A, Lorretto.M.H and Bowen.P., Mechanical Properties of aluminium based particulate metal matrix composites, Journal of composites, 24, 270-275 (1993)
  3. R.N. Lumley and I.J. Polmear, Preparation and some properties of SiC particle reinforced aluminium alloy composites Mater.Design, 24, 671-679. DOI: 10.1016/S0261-3069(03)00156-0 (2003)
  4. Fan T., Zhang D., Shi Z., Wu R., Shibayangai T., Naka M., et al., The effect of Si upon the interfacial reaction characteristics in SiCp/Al-Si system composites during multiple-remelting, J Mater Sci, 34, 517580 (1999)
  5. Hashim J., Looney L., and Hashmi M.S.J., Metal Matrix Composites: Production by the Stir Casting Method, Journal of Material Processing and Technology,92, 1-7 (1999)
  6. V. Raghavan, Aluminum-siliconcarbide-zinc-copper, JPEDAV 32:72-74, DOI:10.1007/s11669-010-9803-8, 1547-7037, ASM International, (2011)
  7. Manna A, Bhattacharayya, A study on machinability of Al/SiCMMC, J Mater Process Technol, 140, 711-6(2003)
  8. P. Sepehrband and S. Esmaeili, Application of Recently Developed Approaches to Microstructural Characterization and Yield Strength Modeling of Aluminum Alloy AA7030, Mater. Sci. Eng. A, 487, 309-315 (2008)
  9. Kannikeswaran K, Lin RY, Trace element effects on aluminum silicon carbide interfaces, J Met, 39, 179 (1987)
  10. Quin S., Chen C. and Zhang, G., The effect of particle shape on ductility of SiC reinforced 6061 Al matrix composite, Material Science and Engineering,272(2), 363-370, (1999)
  11. Gupta M. and Qin S., Effect of interfacial characteristics on the failure mechanism mode of a SiC reinforced A1 based metal-matrix composite, Journal of Materials Processing Technology,67, 94-99 (1997)
  12. S. Muthukumarasamy, A. Guruprasad, A. Sudhakar and S. Seshan, Performance of Zinc Alloy Based Metal Matrix Composites Produced Through Squeeze Casting, Mater. Manuf. Processes,11, 351366 (1993)