6th International Young Scientist Congress (IYSC-2021) and workshop on Intellectual Property Rights on 8th and 9th May 2021.  10th International Science Congress (ISC-2020) will be Postponed to 8th and 9th December 2021 Due to COVID-19.  International E-publication: Publish Projects, Dissertation, Theses, Books, Souvenir, Conference Proceeding with ISBN.  International E-Bulletin: Information/News regarding: Academics and Research

Evaluation of Microbial Contamination of Cutting Fluids with Nano Graphite Inclusions

Author Affiliations

  • 1 Dept of Mechanical Engg, Regency Institute of Technology, Yanam-U T of Puducherry, INDIA
  • 2 Dept of Mechanical Engg, GIT, GITAM University, Visakhapatnam, AP, INDIA

Res. J. Engineering Sci., Volume 3, Issue (2), Pages 12-16, February,26 (2014)

Abstract

The purpose of the cutting fluids is to minimize the friction and heat apart from flush away the chips that are generated during machining operation. Further, these fluids are the mixtures of various synthetic, semi –synthetics, straight oils, emulsifiers, additives and biocides. There is also a possibility of contamination of the fluids in any manufacturing concern because of tramp oils, particulate matter etc. Apart from this a serious problem involves with these water based metal working fluids is the development of microbial contamination and its related other products like exo and endotoxins. Foul odor generation, appearance as a sticky substance and unpleasant nature to touch the fluids causes severe health effects to the workers involved in machining operations. In this paper, samples of graphite nano particle suspended fluids prepared with different weight percentages meant to be used in Minimum Quantity Lubrication. These samples stored for one month and then tested during this period to find the type of bacteria present in the cutting fluids and the growth of microorganisms.

References

  1. Julieb Z Andres F, Kimf H, Steven J. design of hard water stable emulsifier systems from petroleum and bio based semi synthetic metal working fluids. Environ SciTechnol, 37, 5278-88 (2003)
  2. Shaw M.C., Metal cutting principles, 2nd edition, (Oxford University Press, USA) (2004)
  3. Applicability of cutting fluids with nanoparticle inclusion as coolant s in machining by
  4. Srikant R.R., Rao D.N., Subrahmanyam M.S. and Vamsi Krishan P., in IMechEvik 223 Part I, Journal of Engineering Tribology
  5. Roosemore H.W., Evaluation Techniques for Bio-deterioration of Water Miscible Metal working fluids, Bio-deterioration Research Techniques, I, 227-242 (1976)
  6. Rossmoore H.W., Microbial causes of cutting fluid deterioration, Society of Manufacturing engineers, MI,(1974)
  7. Benett EO, The biology of metal working fluids, Lubrication engineering,28, 237-247 (1972)
  8. Rossmoore H.W. and Rossmoore L.A., The identification of defined microbial inoculums for the evaluation of biocides in water based metal working fluids, Lubrication engg., 36, 16-20 (1980)
  9. Rosmoore L.A. and Rosmoore H.W., Metal working Microbiology, Buers, J P (Ed.),Metal working Fluids New York: Marcel Dekker, Inc., 247-247 (1994)
  10. Rosemoore H.W., Evaluation Techniques for Bio-deterioration of water Miscible Metal working fluids, Bio-deterioration Research.
  11. Rosemoore H.W., Antimicrobial agents for water-based metal working fluids, journal of Occupational medicine, 23(4), 147-254 (1981)
  12. American Society for Testing and Materials (ASTM) Designation D 3946-92 in annual book of ASTM standards, vol 5.03, ASTM Philadelphia (1992)
  13. John P Harley, Microbiology lab manual McGraw Hill Asia, (2007)
  14. Narayana Rao S., Satyanarayana B. and Venkatasubbaiah K., Experimental investigation of microbial contamination of nano cutting fluids with cnt inclusion, Global journal of Research in Engineering, 11(4), 1.0, (2011)