International E-publication: Publish Projects, Dissertation, Theses, Books, Souvenir, Conference Proceeding with ISBN.  International E-Bulletin: Information/News regarding: Academics and Research

Reduction of Scour Depth Downstream of Pipe Outlet Stilling Basin Using End Sill

Author Affiliations

  • 1 M.A.N.I.T, Bhopal, INDIA
  • 2 AISECT University Bhopal, M.P. INDIA

Res. J. Engineering Sci., Volume 2, Issue (7), Pages 20-25, July,26 (2013)

Abstract

This paper presents an experimental study about scour pattern downstream of stilling basin for non circular pipe outlet using end sill of different geometry. The study was conducted by designing new stilling basin models in a rectangular shaped pipe outlet of size 10.8cm x 6.3 cm with three inflow Froude numbers namely, Fr = 1.85, 2.85 and 3.85. To study the scour pattern downstream of stilling basin, total 33 test runs were conducted using same test run time and sand bed material. The scour pattern (depth and location) after the end sill were measured for each test run. The study indicates that there is a significant effect of the shape of the end sill geometry on the reduction of scour depth downstream of end sill for the pipe outlet stilling basin.

References

  1. Alikhani A., Behrozi Rad R., Fathi Moghadam, Hydraulic Jump in Stilling Basin with Vertical End Sill. International Journal of Physical Sciences, 5(1), 25-29 (2010)
  2. Elevatorski, Edward, A. Hydraulic Energy Dissipators .McGraw Hill Book Company, Inc., New York (1959)
  3. Bradley J.N. and Peterka A.J. Hydraulic Design of Stilling Basins, Journal of A.S.C.E., Hydraulic Engg, 83(5), 1401-1406 (1957)
  4. Garde R.J. Saraf P.D. and Dahigaonkar J.G., Evolution of Design of Energy Dissipator for Pipe Outlets, J. of Irrigation and Power, 41(3), 145-154 (1986)
  5. Verma D.V.S. and Goel A. Stilling Basins for Outlets Using Wedge Shaped Splitter Blocks, Journal of Irrigation and Drainage Engineering, American Society of Civil Engineering (ASCE), 126(3), 179-184 (2000)
  6. Tiwari H.L., Design of Stilling Basin with Impact wall and End sill, International Research Journal of Resent Sciences, 2(3), 59-63 (2013)
  7. Verma D.V.S and Goel A., Development of Efficient Stilling Basins for Pipe Outlets, Journal of Irrigation and Drainage Engineering, American Society of Civil Engineering, 129(3), 194-200 (2003)
  8. Tiwari H.L., Experimental Investigations of Hydraulic Energy Dissipators for Rectangular Pipe Outlets, PhD thesis, MANIT Bhopal, (2012)